Audio Peak Indicator

The existence of the peak indicator "Audio Peak Indicator" in an audio device is needed. Audio Peak indicator is a simple circuit to detect the peak level of audio signal. Audio Peak indicator circuit is built with duabuah transistor and LED indicator sebgai peak level detection of audio signals. The main function of a series of Audio Peak indicator is to determine the occurrence of the peak level of audio signal that is more than +4 dB, equivalent to 1.25 V rms. If the received audio signal Audio Peak Indicator more than +4 dB was the LEDs in series Peak Audio This indicator will light. Audio Peak indicator circuit is mounted on the output audio system.

Image Series Audio Peak Indicator

Audio Peak Indicator Component List:
R1 = 10Kohm
R2 = 1.2Kohm
R3 = 220Kohm
R4-5 = 4.7Kohm
C1 = 47uF 25V
C2 = 2.2uF 25V
Q1-2 = BC550C
D1 = LED RED

We hope to form the reference materials in the manufacture of circuit pernagkat Audio Peak Indicators in the audio readers.

Continue Reading »

Audio Power Amplifier LM3886

Audio Power Amplifier LM3886

Audio Power Amplifier is an important part in the reproduction of sound in a sound system. Audio Power Amplifier LM 3886 with power IC Audio Power Amplifier is a highly capable and able to produce 68 Watts with power rata2 4Ohm load and capable of producing power 38 Watt with 8Ohm load. With good sound reproduction capabilities of 20Hz-20kHz is also included on this LM3886 Audio Power Amplifier. LM3886 Audio Power Amplifier is equipped with spike protection that will protect the output circuit from overvoltage, undervoltage, overloads, konrsleting power supply, thermal runawaydan peak temperature. Audio Power Amplifier LM3886 also features a noise reduction system which can keep the audio from the noise well.

Image of Basic Audio Power Amplifier Series LM3886

Audio Power Amplifier LM3886

Feature owned LM3886 Audio Power Amplifier

• 68W cont. avg. output power into 4Ω at VCC = ± 28V
• 38W cont. avg. output power into 8Ω at VCC = ± 28V
• 50W cont. avg. output power into 8Ω at VCC = ± 35V
• 135W instantaneous peak output power capability
• Signal-to-Noise Ratio ≥ 92dB
• An input mute function
• Output protection from a short to ground or to the supplies via internal current limiting circuitry
• Output over-voltage protection against transients from inductive loads
• Supply under-voltage protection, not allowing internal biasing to occur Pls | VEE | + | VCC | ≤ 12V, Thus eliminating turn-on and turn-off transients
• 11-lead TO-220 package
• Wide supply range 20V - 94V
• Application of Audio Power Amplifier LM3886
• Stereo audio system
• Active Speaker
• High End Audio Power TV
• Suround Power Amplifier

Continue Reading »

Low Cost Digital Volume Control Amplifier

TDA8551 Mini Digital Volume Control Amplifier

Amplifier with digital volume control can we create a predictably simple because the article Mini BTL Amplifier with Digital Volume Control This series is made ​​only with 1 IC TDA8551. The series of Mini BTL Amplifier with Digital Volume Control is a power amplifier with BTL type 1Watt. Techniques for adjusting the volume in this series has been provided with a pin point control that is controlled by providing an input voltage VCC and GND. The series of Mini BTL Amplifier with Digital Volume Control selector also features mute, standby and operating.

The series of Mini BTL Amplifier with Digital Volume Control is quite simple and small enough to make an amplifier for room or to headphones. Hopefully useful and can provide ideas for making digital amplifier with volume control.

Continue Reading »

Audio Frequency Generator Circuit

Audio Frequency Generator or often known by AFG is a device electronics used to generate signals with audio frequency range. Audio Frequency Generator (AFG) in the market there are many variant, from the analog to the digital . Even the assembly also exists, in principle, AFG is the frequency generator with an audio range. Here is one set of Audio Frequency Generator (AFG) which can be a reference if you want to make a series of Audio Frequency Generator (AFG) . The series of Audio Frequency Generator (AFG) is to use IC L8038 as a signal generator it.

AFG

The series of Audio Frequency Generator (AFG) above has three output waveform that is, sine, square and triangle directly from the IC L8038. IC CD4066 and IC circuit Cd4017 a configuration circuit for waveform selector that can be set by pressing SW1. To adjust the working frequency is set by potentiometer R2.

Continue Reading »

High Impedance amplifier circuits

Mini High Impedance Amplifier is an amplifier with 1 Watt and have a very high input impedance. The series amplifiers can have a very high input impedance because the use of two transistors in the input that is placed Darlington. Input impedance circuit amplifier achieves 20M Ohm. Mini High Impedance Amplifier circuit uses four transistors and an IC 741. Gain amplifier with high input impedance , we can provide the input signal from device with weak levels though.

Mini High impedance amplifier circuit is very cheap to make and quite simple. This amplifier circuit use 9VDC power supply.

Continue Reading »

Decibel Meter Circuit

The series of decibel meter function to determine the level of signal strength that is given to the speaker on the audio system. Decibel meter circuit is often also known as the VU meters on audio hifi system. For a series of decibel meters in this article displays strong technique with signal lights and LED. Decibel meter input circuit is taken from the output of the audio system that will connect to the speakers. The series uses a decibel meter this fruit as a comparator LM324 IC and 1 level amplifier with gain control. The series of decibel meter or VU meter is quite simple to make and circuit details can be seen in the following figure.

Decibel Meter Circuit Diagram

The series of decibel meters above requires 12VDC voltage source and an input signal from the audio power output that is connected to the speakers. The series of decibel meters can be installed on powered speakers or other audio amplifier system. To adjust the audio signal reception sensitivity is set by adjusting the value VR500K which serves as feedback and reinforcement factors will affect the amplifier circuit ahead of the decibel meter.

Continue Reading »